-->

Wednesday, March 08, 2017

Redmi Note 3 Flash File With Normal USB Cable Flashing Guide Windows 7 32Bit

Redmi Note 3 flash with Normal USB Cable in Windows 7 x32

Here is the best working 100% solution of flashing Redmi note 3 with Flash File Download With Normal USB Cable in Window 7 32 Bit first on the Internet .

Requirement


  1. Mi Flash tool Beta Setup
  2. Redmi note 3_V7.3.2.0 Flash file
  3. Fastboot To EDL Tool

Steps for installing Redmi Note 3 Flash File With Normal USB Cable


  1. Switch Off your Mobile, Press Vol Down and Power Key For going into Fastboot Mode .
    Redmi Note 3 Flash File
  2. Download Fastboot To EDL Files and Run "edl.bat" To Enter EDL Mode .Redmi Note 3 Flash File
  3. Now you can see that your Mobile Will switched off And a port that is "9008" showing In Device Manager .
  4. Extract Firmware Folder On Desktop And Rename it to any name .
  5. Now Open MiFlash Tool 
  6. Click On "Select" And Select Folder
  7. Refresh For Scan Connected Phone And "Start"
  8. Once it has been finished, A W8 Success Message comes .
File Password

my new site please visit flashfiletool.com

Flashing And Imei Repair Tools
Imei Tools   Tutorial  SP Flash Tool  Spd Flash Tool  Mtk Imei Tool
Factory Original Firmware [Flash File]

Search Here

Popular Posts