-->

How To flash tablet using LiveSuit pack full procedure

Procedure for flashing Image flash file or operating system by using LiveSuit flash tool

Requirements :-

  1. flash tool software - Download from HERE
  2. USB drivers           - Download from HERE
  3. flash file firmware - Download from HERE
  4. A USB cable

Supported Android Devices listed Below :-

  1. Allwinner Chipset Devices
  2. A10 ( Flash file Download )
  3. A13 ( Flash file Download )
  4. A20 ( Flash file Download )
  5. A31 ( Flash file Download )
FOLLOW US ON              FACEBOOK
TRY OUR ANDROID      APP
credit:- by welcome zone haldwani on www.androidflashfile.com

Livesuit pack Flash Tool Download

Procedure for Installing Stock Rom into Android Devices using LiveSuit flash tool

Step 1:  First of all Download and install the Android USB Driver for your device into your Computer . If you have already installed the USB drivers then SKIP this step .

Step 2:  Download and Install LiveSuit flash tool into your computer .

Step 3:  Download the Flash file Stock Rom Of your Android Device and extract it .

Step 4:  Open LiveSuit flash tool by clicking on the icon LiveSuit.exe .


user guide

 This Window will appear on the screen
Step 5: Now, Select Yes to follow the Upgrade Wizard.
user guide


Step 6: Now, There are two modes for upgrading , one is "Upgrade Mode" which is General and second is "Mandatory" . Click on "Mandatory" to continue.
user guide


Step 7: Now, Unplug all the connected Smartphones and devices and tablets from the computer (if it is connected), then Click on Yes button to Continue.
user guide


Step 8: Now, Please select the Image flash file or operating system . If you are ready Click on Yes Button and select the firmware.
livesuit user guide

livesuit user guide


Step 9: Now, here is a important point Dont Click on "Finish" Button.

Step 10:  Power Off your Android smartphone .

Step 11: Now connect your Android Smartphone device or Tablets to the Computer via using USB Cable by pressing Volume Down Key, While holding the Volume Down Key immediately Press Power Key for 10 times, so that the computer can recognize your device.

Working USB Drivers For Using Livesuit flash tool 


Step 12: Now, Click on "Yes" to Continue.
livesuit user guide


Step 13: On the next Windows, again click on Yes Button to continue if it is not appear slisk on the "system upgrade"
livesuit user guide


Step 14: Flashing process will start (It usually takes 4 to 6 minutes for completing ).


Step 15: After Flashing completed successfully then Upgrade Succeeds Window will appear on the screen now ,Click on "OK" to Close it.


Step 16: Now, close LiveSuit tool by clicking on the "Exit" Button.


Step 17: Now Restart your device .
Congratulation, It means you have been successfully Flashed your Android Device .

Important Notes :-

  1. Charge Your Android Device Upto Minimum 60% - 80% before installing the firmware .
  2. This tool will only works  to flash .img format flash file .
  3. Please Take a Backup of your Phone backup before using the Phoenix USB Pro flash tool, Because flashing process deletes your all personal data .

SEE ALSO :-


FOLLOW US ON              FACEBOOK
TRY OUR ANDROID      APP
credit:- by welcome zone haldwani on www.androidflashfile.com

File Password

my new site please visit flashfiletool.com

Flashing And Imei Repair Tools
Imei Tools   Tutorial  SP Flash Tool  Spd Flash Tool  Mtk Imei Tool
Factory Original Firmware [Flash File]

Search Here

Popular Posts