Step By Step Full Procedure For Writing Or Repair IMEI On SPD Phone With SPD WriteIMEI Repair Tool
- Firstly download the spd imei tool from here .
- Then make sure the drivers are successfully installed in your computer or Download from here
- Now open the software .
STEPS For SPD IMEI Repair1. open WriteIMEI.exe,
2. You can press “Set” button on the main interface to change the setting of WriteIMEI tool.
Setting interface elements :-
- Setting of IMEI.
- Setting of Blue Tooth and WIFI.
- The first 14 numbers of IMEI when “Auto-Generate IMEI ” is checked.
- Setting of checking version, include software version and AP version.
- Setting of SN(serial number)
3. Mode Select Interface
You can press “Mode Sel” button on the main interface to change the Mode of WriteIMEI tool.
4. Select the Work Mode on mode sel interface, and Check items on set interface.
5. Press “Select”and“Save” button .
Important tips :-1. Choose the port that connects to phone, If the tool mode is “Working Mode”, press “Write” button to start writing IMEI.
2. If the tool mode is “Normal Mode”, press “Write” button to start writing IMEI .
3. If the tool mode is “Normal Mode”, Power on the connected phone, wait for completing to write IMEI.
4. If the tool mode is “Working Mode”, wait for completing to write IMEI.
5. If pass, the result box will be green and shows a display pass message , otherwise will be red.
|Flashing And Imei Repair Tools|
|Imei Tools Tutorial SP Flash Tool Spd Flash Tool Mtk Imei Tool|
Factory Original Firmware [Flash File]